Baseball Jacket Manufacturing: Snap Fronts and Rib Knit

Baseball Jacket Manufacturing: Snap Fronts and Rib Knit

Summary

A baseball jacket is defined by three structural decisions: the snap closure, the rib knit trim and the panel layout. This guide covers snap type and size, placket interfacing, snap spacing, 2x2 rib ratios and recovery, shell and sleeve fabric selection, pattern grading, the ten-station construction sequence, lining and trim, decoration placement, a nine-point inspection, MOQ 50 pieces, 7-14 day sampling, 25-40 day bulk, 30/70 payment terms and compliance documents.

Baseball Jacket Manufacturing: Snap Fronts and Rib Knit
Baseball Jacket Manufacturing

Baseball Jacket Manufacturing: Snap Fronts and Rib Knit

November 21, 2026 Ginwen Production Team Jacket Manufacturing

A baseball jacket is a rib-trimmed, snap-front outerwear style defined by three structural decisions: the closure, the rib knit, and the panel layout. Everything else, from shell fabric to lining and decoration, is a variation on that frame. For buyers, this matters because those three decisions drive fit, durability, sample rounds, and a large share of the unit cost. A baseball jacket is not a bomber with a different name. The bomber typically uses a zip front, a knit collar and a straight hem; the baseball jacket uses a metal snap placket and rib knit at the collar, cuffs and hem, which changes how the pattern is drafted and how the garment is sewn. This guide walks through the manufacturing detail of both signature elements, then covers fabric selection, grading, construction sequence, quality control, MOQ, sampling and lead time, so a brand team can write a tech pack that a factory can quote without guesswork. If you are comparing ready styles first, review our baseball bomber jacket range before reading the spec sections below.

What Defines a Baseball Jacket and How Is It Built?

A baseball jacket is a hip-length outerwear garment with a full front opening closed by metal snaps, a rib knit stand collar, rib knit cuffs and a rib knit hem band. The body is usually cut from a woven shell such as melton wool, cotton twill or nylon, and the sleeves may be cut from the same shell or from a contrasting material, most often a smooth synthetic or a leather-look PU. The style sits between a varsity jacket and a bomber in the minds of consumers, and that confusion is precisely where production problems start. A varsity jacket usually carries a heavier wool body, leather sleeves, striped rib trim and chenille lettering. A bomber jacket usually carries a zip, a utility pocket on the sleeve and a lighter nylon shell. A baseball jacket keeps the rib trim and the sportswear silhouette but simplifies the front to snaps, which lowers trim cost and speeds up the sewing line.

The garment is built from five sub-assemblies: front left, front right, back, two sleeves, and the trim set. Each front panel includes a turned-back placket that holds the snap components, and that placket is where most quality issues appear. The back panel is usually a single piece or split at the centre for a yoke. Sleeves are set in or raglan depending on the block. The trim set is three separate rib pieces, each with different stretch requirements, sewn to the body and sleeves in a sequence that keeps the rib from stretching out of shape. Understanding this breakdown is the fastest way to read a factory quote, because each sub-assembly carries its own labour and trim cost. Buyers who want to see how the same frame is adapted to a heavier, padded version can compare our custom padded baseball jacket program, which uses the same snap-and-rib logic with a quilted body.

5-7 Snaps on a Typical Adult Front
3 Rib Knit Components per Jacket
50 Pieces per Style Minimum Order
25-40 Days for Bulk Production

Three structural rules separate a well-made baseball jacket from a costume-grade one. First, the placket must be interfaced so the snaps do not tear through the shell after repeated opening. Second, the rib trim must be cut with a controlled negative ease so it grips the body without puckering the seam. Third, the shell and the rib must be balanced in weight, because a 700 g melton body sewn to a thin 280 g rib will pull the rib flat within a season. None of these rules are expensive to follow, but all of them must be written into the tech pack before sampling, not discovered during bulk.

Snap Front Engineering: Hardware, Placket and Closure

The snap front is the defining feature of the style and the most common source of returns. A snap is a two-part fastener: the cap and socket on one side, the stud and post on the other. The post passes through the shell and is clinched to the cap, and the holding force comes from the spring inside the socket. Three variables determine whether the closure survives real wear: the snap type, the shell and interfacing build-up, and the spacing between snaps.

Snap TypeTypical Cap SizeHolding BehaviourBest UseCost Tier
Ring snap15 mm to 18 mmFirm, audible click, strong lateral holdWool and twill baseball jacketsMedium
Prong snap12 mm to 15 mmLighter hold, thinner profileLightweight nylon and kids stylesLow
Spring snap18 mm to 21 mmStrong pull, best for heavy shellsMelton, padded and lined stylesMedium to high
Magnetic closure18 mm to 25 mmSmooth, no click, variable holdPremium and adaptive designsHigh

For an adult wool baseball jacket, a 15 mm to 18 mm ring snap in a nickel-free finish is the workhorse choice. It reads as authentic, holds firmly through a thick placket, and is available in the full range of plated and painted finishes that brand teams expect. Prong snaps are cheaper and thinner, which makes them suitable for lightweight shells and children's styles where weight matters, but they are a poor match for a 600 g melton body because the prong legs can work loose in a dense weave. Spring snaps are heavier and are usually reserved for padded styles or where the buyer wants an unmistakably solid closure.

Placket construction matters as much as the hardware. A typical adult placket is 32 mm to 38 mm wide when finished, built from a turned-back extension of the front panel plus a fusible interfacing of 40 g to 60 g. The interfacing does two jobs: it stops the shell from stretching around the snap post, and it gives the placket a crisp edge that survives pressing. Without it, a wool shell will fray at the snap hole within a few dozen open-and-close cycles, and the snap will pull through. On lined styles, the placket is usually clean-finished with a facing so no raw edge is visible when the jacket is open.

Spacing follows body length rather than habit. A short adult baseball jacket of 62 cm to 66 cm centre-back length usually carries five snaps; a longer 70 cm to 76 cm style carries six or seven. The top snap sits 20 mm to 30 mm below the collar seam so the collar can fold without fighting the closure, and the bottom snap sits 25 mm to 40 mm above the hem rib seam so the rib can stretch without stressing the lowest snap. Uneven spacing is immediately visible when the jacket is closed and is one of the first defects a buyer notices on a fit sample.

Test the snap before bulk. Ask for a pull test on the actual shell and interfacing combination, not on a swatch of ideal fabric. Record the force in the tech pack, repeat the test on the bulk lot, and check that the snap still clicks cleanly after 30 open-and-close cycles. A snap that feels tight on a sample can still crack the shell at the post if the interfacing is too light.

Rib Knit Collar, Cuffs and Hem: Spec, Stretch and Recovery

Rib knit is the second signature element and the one buyers most often under-specify. A rib is a knitted fabric with alternating columns of knit and purl stitches. The 2x2 rib, where two knit columns alternate with two purl columns, is the standard for baseball jacket trim because it offers a good balance of stretch, recovery and surface texture. A 1x1 rib stretches more but recovers less cleanly at the seam; a 3x3 rib is denser and more expensive and is usually reserved for premium or heavy wool styles.

Three measurements control the look and the fit: the finished height of each rib piece, the circumference relative to the opening it finishes, and the elastane content. Collar height on an adult baseball jacket is commonly 60 mm to 70 mm folded, which gives a stand collar that covers the neck seam without choking. Cuff height is usually 70 mm to 80 mm, and hem height 60 mm to 80 mm. A taller hem band reads as more vintage and more expensive, but it also adds weight and cost, so the choice should be made against the target retail price rather than by preference alone.

Stretch Ratios

  • Hem rib at 82 to 88 percent of body chest
  • Cuff rib at 60 to 65 percent of sleeve opening
  • Collar rib at 88 to 94 percent of neckline
  • Ratio measured flat, not stretched

Recovery Specs

  • 3 to 5 percent elastane for adult styles
  • 2x2 rib structure as the default
  • Weight range of 320 to 420 g per square metre
  • Recovery checked after five wash cycles

The ratio between rib circumference and opening circumference is the single number that decides whether the jacket hangs correctly. If the hem rib is cut too wide, it will not grip and the jacket will balloon at the waist. If it is cut too narrow, it will pull the body into a permanent gather and the front placket will bow. For an adult medium with a 114 cm chest, a hem rib of roughly 96 cm to 100 cm flat is a typical starting point, adjusted for the block and the shell weight. Cuffs follow the same logic against the sleeve opening, and the collar is the least elastic of the three because it must hold its shape.

Rib quality is where cheap trim shows itself. A low-cost rib with high polyester content and no elastane will stretch permanently at the cuff within a few weeks of wear, and the hem will develop a wavy edge after washing. A better rib uses combed cotton or a cotton-poly blend with 3 to 5 percent elastane, is dyed to match the shell under the same lighting, and is pre-shrunk so the finished garment does not shrink below the graded size. Ask for the rib composition, weight and shrinkage figures in writing, and ask for a matched dye lot for the whole order. Our breakdown of letterman jacket materials, trim and branding covers the same trim decisions from the varsity side. Mixed dye lots are the most common reason a black jacket ships with a collar that reads slightly brown.

Specify rib as a separate line item. Show the rib composition, weight, colour reference and shrinkage on the bill of materials. When rib is bundled into a general trim cost, factories substitute by availability, and the substitution is almost always invisible until the first wash.

Shell and Sleeve Fabric Selection for Baseball Jackets

Shell choice sets the price ceiling, the season, and the decoration method. The four families below cover most baseball jacket programs, and each behaves differently at the snap placket and the rib seam.

FabricWeight RangeHand FeelSnap PerformanceTypical Positioning
Melton wool550 to 700 g/m2Dense, dry, structuredExcellent with 60 g interfacingHeritage varsity and school programs
Cotton twill280 to 360 g/m2Soft, matte, broken-inGood with 40 g interfacingStreetwear and mid-market brands
Nylon 210T to 320D70 to 180 g/m2Smooth, light, technicalNeeds reinforced placketLightweight and transitional styles
Polyester fleece280 to 350 g/m2Brushed, warm, casualGood, but stretches at the postValue programs and teamwear

Melton wool remains the reference fabric for the style because it holds a press, hides seam bulk and accepts chenille and embroidery beautifully. Its density is also its downside: a 650 g melton body needs a stronger snap and a heavier needle, and it is a poor choice for a brand targeting a spring delivery in a warm market. Cotton twill is the pragmatic middle ground. It is easier to dye, cheaper to ship, and softens with wear, which suits a streetwear buyer who wants the silhouette without the wool price. Nylon brings the technical look and the lowest freight cost per unit, but it is unforgiving at the placket because the weave is tight and the shell is thin, so a reinforcement strip is mandatory.

Sleeve material is a separate decision and a major visual signature. Matching sleeves keep the jacket quiet and let decoration carry the design. Contrast sleeves in PU, nylon or fleece create the classic two-tone look and add a trim cost line, but they also add a cutting and marking step. For a first production run, matching sleeves reduce risk: fewer materials, fewer dye lots, fewer seams to align. Buyers who want the contrast look should confirm that the contrast material has been tested for crocking and colourfastness against the body shell, because a black PU sleeve rubbing on a white wool body can leave a grey haze at the armhole. Our bomber fabric guide covers the same fabric families from a bomber perspective, which is useful when a range mixes both silhouettes.

Pattern, Block and Grading for Baseball Jackets

A baseball jacket pattern is drafted from a block that already accounts for the rib trim. This is different from drafting a zip-front jacket and adding rib later. Because the hem rib pulls the body in, the body pattern must be cut with extra width at the waist and a slight curve at the side seam so the rib can gather the fabric evenly. If a team simply takes a bomber block and swaps the hem band for rib, the side seams will pucker and the front panels will flare.

The standard block has four body panels and two sleeves. The front panels include the placket extension, usually 35 mm to 40 mm before turning, and a facing on lined styles. The back is normally one piece with a centre-back seam for shaping, or two pieces when a yoke is used. Sleeves are either set-in or raglan. A set-in sleeve gives a cleaner shoulder and a more tailored look; a raglan sleeve is easier to sew, uses more shell fabric and reads more casual. For a first run, set-in sleeves are the safer choice because the armhole curve is well understood by most sewing lines and the fit is easier to correct at the sample stage.

Grading follows the market, not the factory's habit. US men's sizing typically grades 2.5 cm at the chest per size step, EU sizing often uses 2 cm, and youth programs need a different grade because chest and length do not scale at the same rate. The rib components must be graded too, and this is where many tech packs fall short: the shell is graded correctly, but the rib is ordered in one width for all sizes, so the smallest size has a slack hem and the largest size has a tight one. Write the finished rib circumference for every size into the spec sheet, and require the factory to confirm it on the size set.

Ask for a size set, not one sample. A single medium sample proves the pattern works at one point. A three-size set in small, medium and extra large proves the grade works. The second is what protects a bulk order, and most factories will produce it for a modest additional sample charge.

Construction Sequence: From Cutting to Final Press

Knowing the sequence helps a buyer understand where delays and defects originate. The list below reflects a typical cut-and-sew line for a lined baseball jacket with a snap front and rib trim. Exact station counts vary with factory layout, but the order is consistent.

1

Fabric Inspection and Relaxation

Shell and lining are checked for shade, width and defects, then relaxed before cutting so the panels do not shrink after sewing.

2

Cutting and Numbering

Panels are cut in a lay, numbered by ply and bundle, and checked against the marker to keep shade continuity across the jacket.

3

Fusing the Placket and Facings

Interfacing is fused to the front placket, collar stand area and pocket openings at controlled temperature and pressure.

4

Pocket Setting and Panel Assembly

Welt or patch pockets are set, then shoulder and side seams are joined and pressed open or flat-felled.

5

Sleeve Setting

Sleeves are set into the armhole with ease distributed at the cap, then the underarm seam is closed in one pass.

6

Rib Attachment

Collar, cuffs and hem are attached with a stretch stitch, held at the specified ratio and checked for even gathering.

7

Lining Assembly and Bagging

The lining is joined and bagged through the front opening or a back seam, then the closing seam is finished by hand or machine.

8

Snap Setting

Snaps are marked from a template, punched and clinched, then checked for alignment with the jacket closed.

9

Decoration

Embroidery, patches or print are applied after the body is closed so placement follows the finished garment, not the flat panel.

10

Final Pressing and Inspection

The jacket is pressed, measured against the spec, inspected under light and folded for packing.

Typical bulk window: 25 to 40 days after snap and label approval, with sampling at 7 to 14 days before that.

Two stations deserve extra attention. Snap setting is the most tool-dependent step: a worn die produces misaligned caps and cracked shells, and the defect only appears after a few hundred pieces. Ask how often dies are replaced and whether the first 20 pieces of each lot are pull-tested. Decoration after bagging is the second: embroidery hooped on a finished jacket can distort the placket if the operator pulls the body to flatten it. A flat-laid panel embroiders more accurately but places the design before the seams move, so the choice depends on the design and should be agreed at sampling.

Lining, Trim and Interior Finish

The inside of a baseball jacket is visible every time it is worn open, and buyers judge it. A basic polyester taffeta lining at 60 g to 80 g per square metre is the default: it slides over layers, is cheap, and accepts a printed logo repeat. A brushed polyester or a lightweight cotton poplin raises the perceived quality and the cost, and a quilted lining adds warmth but changes the pattern because the body needs extra ease.

Interior details that separate a good garment from an average one include a clean bagging seam at the hem, a lined pocket bag that does not peek at the opening, a hanging loop at the centre-back neck, and a woven brand label placed so it does not scratch the neck. On wool styles, a half-lining or a lined sleeve is often enough to stop the wool from catching on shirts, and it reduces cost compared with a full lining. On nylon styles, a mesh upper back panel improves breathability and is a common request from activewear buyers.

Trim selection should be consolidated. Every additional zip, cord, eyelet or label adds a purchase order, a minimum quantity and a lead time. A baseball jacket typically needs only snaps, rib, thread, labels, care labels and packing. Keeping that list short is one of the reasons the style is easier to launch than a technical shell, and it is a real advantage for a first collection. Brands that want a more complex interior can add an inside chest pocket or a media pocket without changing the outer pattern, which keeps the sample round short.

Decoration and Placement on a Snap-Front Jacket

Decoration is where the baseball jacket earns its margin, and where placement mistakes are most visible. The snap placket creates a hard vertical line down the centre front, so any chest design must be offset to the wearer's left or right rather than centred across the closure. A centred chest logo will break in half when the jacket is open and will pucker when it is closed. The standard placement is 70 mm to 90 mm below the shoulder seam and 40 mm to 60 mm from the placket edge, adjusted to the design width.

Chenille patches remain the reference decoration for the category. A chenille patch is tufted, gives a raised, fuzzy surface and is usually bordered with a chain stitch or a merrowed edge. It is heavier than embroidery, so it belongs on the chest or the back, not on a sleeve that must flex. Embroidery is the most flexible option and works on wool, twill and nylon, but dense designs on nylon need a backing to stop the shell from perforating. Screen print and heat transfer are the cheapest options at volume and the least durable on a garment that is worn open and closed, because the placket edge abrades the print.

Chest and Back

  • Left chest patch 70 to 90 mm wide
  • Back name arch across the shoulder blades
  • Keep 40 mm clear of the placket
  • Check placement with the jacket closed

Sleeves and Hem

  • Sleeve patches on the upper arm only
  • Avoid the flex zone above the cuff
  • No decoration across the rib seam
  • Number prints set 30 mm below the yoke

Whatever the method, approve decoration on a finished garment rather than on a flat swatch. The placket, the rib and the lining all change how a design sits, and a patch that looks correct on a cutting table can sit an inch too low once the collar is attached. Our guide to chenille patch and 3D embroidery options explains the technique differences in more depth, and the same rules apply to baseball styles.

Quality Control: A Nine-Point Inspection for Baseball Jackets

Most defects in this style cluster around four areas: the placket, the rib seams, the armhole and the snap alignment. An inspection that checks those four areas first will catch the majority of problems before packing. The table below is a practical incoming checklist that a buyer or a third-party inspector can use on a finished lot.

CheckWhat to Measure or ObserveTypical Failure
Snap alignmentClose the jacket flat; caps must meet sockets without pullPlacket bowing, caps offset by 2 mm or more
Snap securityPull each snap, then cycle open and close 30 timesCracked shell, loose post, snap pull-through
Rib ratioMeasure hem, cuff and collar flat against the specSlack hem, tight cuff, wavy seam
Rib recoveryStretch and release; check for permanent deformationBagged cuff, stretched collar
Seam alignmentSide seams, armhole and underarm must meet cleanlyEase puckers, mismatched notches
Placket widthMeasure finished width top, middle and bottomTapered placket, uneven turn
Lining baggingCheck the closing seam and hem for raw edgesLining peeking, twisted bagging
Decoration placementMeasure from shoulder and placket on a closed jacketDesign crossing the closure, low patch
Measurement and shadeGrade measurements plus shade check under daylightOut-of-tolerance body length, mismatched rib

Two of these checks are worth writing into the purchase order as acceptance criteria rather than as informal notes. Snap security is one, because a failed snap makes the garment unsellable and the fix is a full rework. Rib ratio is the other, because a hem that is 4 cm too wide cannot be corrected without opening the seam, and on a finished lot that means either a discount or a remake. Everything else can usually be pressed, trimmed or re-labelled.

Inspect before decoration, not only after. A pre-decoration inspection catches placket and rib problems while the garment can still be repaired cheaply. Once a chenille patch is applied, opening the front seam to fix a snap costs more than the decoration itself.

MOQ, Sampling, Lead Time and Cost Structure

Baseball jackets are a moderately complex cut-and-sew style, and the commercial terms reflect that. At Ginwen, the standard minimum is 50 pieces per style, which is low enough for a first collection and high enough to justify a dedicated cutting lay and a trim purchase. Sampling runs 7 to 14 days depending on whether the shell and rib are in stock, and bulk production runs 25 to 40 days after approval of the snap, label and decoration. Sample fees fall in the 50 to 200 US dollar range per style and are deductible from the bulk order. Payment terms are 30 percent deposit with the balance before shipment.

Understanding the cost split helps a buyer negotiate without damaging quality. In a typical quote for a lined wool-blend baseball jacket, the shell accounts for the largest share, labour is the second largest, trim including snaps and rib is a smaller but highly visible line, and decoration ranges widely with the technique. The exact percentages move with the fabric price, the order quantity and the decoration method, so treat any published split as a planning range rather than a quotation. The practical rule is that the three signature elements, the snap, the rib and the placket build, should never be the lines that get cut to hit a target price. Cheapening them produces a garment that looks correct in a photo and fails in the first month of wear.

50 Pieces per Style MOQ
7-14 Days for Sampling
25-40 Days for Bulk
30/70 Deposit and Balance Terms

Quantity breaks are real but not dramatic at the low end. Moving from 50 to 300 pieces spreads the cutting and sampling setup over more units and usually improves the unit price, while moving from 300 to 1,000 pieces mainly improves fabric purchasing and line efficiency. Brands planning a two-season range should place the first order at a quantity they can sell through, then reorder the proven style rather than over-committing to an unproven colour. The sample-to-bulk workflow for bomber styles follows the same approval gates described here. Reorders are faster because the pattern, snap die and rib specification already exist.

Private Label, Branding and Packaging

A baseball jacket is an easy garment to private label because the branding surfaces are well defined. The main label sits inside the centre-back neck, the care label sits in the left side seam, and the outer branding usually appears as a chest patch, a sleeve patch or a back name arch. A woven damask label reads more premium than a printed satin label and costs more; a printed label is acceptable for a first run and can be upgraded on reorder. Hang tags, polybags and carton markings are separate purchase items with their own minimums, so confirm them before the order is finalized.

For brands selling through their own store, a small woven flag label at the side seam and a branded neck tape are inexpensive upgrades that photograph well. For wholesale accounts, the priority shifts to packing accuracy and carton labelling, because a short shipment or a mixed size pack costs the buyer more than a plain label. Our custom varsity jacket program uses the same private label workflow, which is useful if a range combines baseball and varsity silhouettes under one brand block.

Compliance, Testing and Documentation

Compliance requirements depend on the market, the fibre content and the age group, and they should be confirmed before the first sample rather than before shipment. The baseline for a European or North American order usually includes fibre content and care labelling, a restricted substances list declaration, and social compliance evidence from the factory. Ginwen holds ISO 9001 for quality management, BSCI for social compliance, RDS for responsible down where down is used, and OEKO-TEX for tested textiles. Certificates should be current and should cover the site where the order is produced.

Three documentation items are worth requesting in writing at the quotation stage. First, the fibre composition of the shell, lining and rib, because a blended wool shell must be labelled accurately and a claim such as "wool rich" needs a defined threshold. Second, the care instructions that the factory recommends, because a wool shell and a cotton rib may need different wash guidance and the label must reflect the most delicate component. Third, any test reports for colourfastness, shrinkage and snap attachment that the factory already holds, so the buyer knows which tests must be commissioned separately. None of this replaces the buyer's own testing protocol, but it prevents the common situation where a label is printed before the composition is fixed.

For buyers shipping into the EU, also confirm the responsible person and the technical file requirements that apply to the product, and keep the declaration of conformity with the shipment documents. For US orders, confirm whether the style is intended for children, because that changes the testing scope. A factory can supply the manufacturing evidence, but the legal declaration belongs to the brand, so the division of responsibility should be agreed early. If a program uses recycled or organic claims, ask for transaction certificates that cover the specific lot, not a general marketing statement.

Frequently Asked Questions

What is the difference between a baseball jacket and a varsity jacket?

A baseball jacket uses a snap front and rib trim on a lighter body, while a varsity jacket typically uses a heavier wool body, leather sleeves, striped rib and a snap or zip front with chenille lettering. The baseball jacket is the simpler, lighter style and is usually less expensive to produce.

How many snaps should a baseball jacket have?

Five snaps is standard for a short adult style of 62 cm to 66 cm centre-back length. Six or seven are used on longer styles of 70 cm to 76 cm. The top snap sits below the collar seam and the bottom snap above the hem rib so neither interferes with the trim.

What rib should be used for the collar, cuffs and hem?

A 2x2 rib in a 320 to 420 g per square metre weight with 3 to 5 percent elastane is the standard for adult styles. The hem is cut at roughly 82 to 88 percent of the body chest, the cuff at 60 to 65 percent of the sleeve opening, and the collar at 88 to 94 percent of the neckline.

Can a baseball jacket be made in plus sizes?

Yes. The pattern must be graded separately beyond the standard range, and the rib ratios need to be recalculated rather than scaled linearly. Ask for a size set that includes the largest size so the hem and placket can be checked on a body, not only on paper.

What is the minimum order for a custom baseball jacket?

At Ginwen the minimum is 50 pieces per style, with sampling at 7 to 14 days and bulk at 25 to 40 days after approval. Sample fees of 50 to 200 US dollars per style are deductible from the bulk order, and payment terms are 30 percent deposit with 70 percent before shipment.

How should a snap front be tested before bulk production?

Test the snap on the actual shell and interfacing combination, record the pull force in the tech pack, and cycle each snap open and closed 30 times. Then repeat the test on the first 20 pieces of the bulk lot and confirm the die is not worn.


A baseball jacket lives or dies on two details that buyers often treat as afterthoughts: the snap placket and the rib trim. Get the interfacing, the snap spacing and the rib ratios right, and the rest of the garment becomes straightforward. Get them wrong, and no amount of decoration will hide a bowing front or a wavy hem.

If you are planning a baseball jacket program, start with the spec rather than the sample. Share your target market, size range, shell preference and decoration plan, and we will confirm the snap, rib and pattern details before quoting. Send your requirements for a quotation, contact our team with a technical question, or browse the full jacket catalog to compare silhouettes. More production guides are published on our manufacturing blog.