What fabric is a bomber jacket usually made from?
- Share
- Issue Time
- Nov 15,2026
What Fabric Is a Bomber Jacket Usually Made From?
A bomber jacket is usually made from one of four fabric families: nylon flight satin for the MA-1 line, polyester or poly-cotton twill for modern streetwear and uniform programs, cotton twill and canvas for heritage A-2 and collegiate looks, and leather, suede or sheepskin for premium flight jackets. Each family carries its own weight range, finish options, cost band and tooling requirements, so the fabric decision effectively fixes the retail price, the season and the factory setup before a single pattern is graded.
The sections below work from the most common bulk specification outward: what buyers actually order, how the named fabrics behave in cutting and sewing, which weights map to which selling season, and how to write the fabric block of a tech pack so that a sample and a bulk lot cannot drift apart.
Short Answer (Citable)
Direct, quotable summaryA bomber jacket is usually made from nylon flight satin, polyester twill, poly-cotton twill, cotton twill or canvas, with leather, suede and sheepskin reserved for premium flight styles. The most common bulk build is a 210D to 420D nylon or polyester shell at roughly 6.5 to 9 oz/yd2 (220 to 305 gsm), a polyester taffeta lining, a light polyester fill, ribbed knit collar, cuffs and hem, and a durable water repellent finish. Cotton twill bombers typically run 8 to 12 oz/yd2 for a drier, matte hand, while leather bombers use 0.8 to 1.0 mm goat or cowhide.
That answer is deliberately specific because the phrase bomber jacket covers at least five distinct products. An MA-1 flight jacket, a satin streetwear bomber, a quilted varsity hybrid and a suede A-2 share a silhouette family but almost nothing else in the fabric block. When a buyer sends a reference photo without a fabric specification, the first job is to decide which of those products the photo actually represents, then price the fabric that belongs to it rather than the fabric that happens to be in stock.
If the reference is a glossy olive or black shell with a utility pocket on the sleeve, the expectation is nylon flight satin. If it is matte, slightly stiff and takes embroidery and screen print cleanly, the expectation is usually a polyester or poly-cotton twill. If it is heavy, dry to the touch and softens with wear, cotton twill or canvas is the honest match. Reviewing the fabric selection criteria for custom jackets before sampling prevents the most expensive mistake in the category: rebuilding a style because the shell reads wrong in photographs.
The Four Core Fabric Families at a Glance
How the main options compare in productionBomber fabric selection is a trade between three variables that always move together: how the shell looks under retail lighting, how it performs in wind and light rain, and how much it costs per garment at a 50 to 500 piece order. The table below maps the families that account for most bulk orders, with the specification language a factory actually needs in order to quote.
| Fabric family | Typical construction and weight | Hand feel and performance | Standard bomber use | Bulk considerations |
|---|---|---|---|---|
| Nylon flight satin | 100% nylon 6.6, 210D to 420D, 6.5 to 9 oz/yd2, calendered back | Glossy face, smooth drape, wind resistant, light water repellency | MA-1, MA-2, satin streetwear bombers | Sheen consistency between dye lots is the main risk; request a light box check |
| Polyester twill | 100% polyester, 2/1 or 3/1 twill, 220 to 300 gsm | Matte, firm, holds shape, excellent print and embroidery base | Modern streetwear, team and uniform bombers | Lower cost than nylon; confirm anti-pilling and color fastness |
| Poly-cotton twill | 65% polyester 35% cotton, 240 to 320 gsm | Soft with a dry hand, breathable, moderate wrinkle recovery | Mid-market bombers, corporate and promotional programs | Blend ratio must be stated; shrinkage control depends on finishing |
| Cotton twill or canvas | 100% cotton, 8 to 12 oz/yd2, garment dyed or piece dyed | Dry, structured, ages visibly, minimal sheen | Heritage A-2, collegiate and workwear bombers | Pre-shrunk or sanforized required; garment dye adds 7 to 10 days |
| Corduroy | Cotton or cotton-blend, 8 to 14 wales per inch | Soft pile, warm surface, strong seasonal texture | Autumn and winter fashion bombers | Pile direction must be cut one way; nap loss at seams needs review |
| Leather and suede | Goat or cowhide, 0.8 to 1.0 mm; suede 0.7 to 0.9 mm | Dense, windproof, develops patina, highest perceived value | A-2, G-1, premium fashion bombers | Hide yield drives cost; sampling needs matched hides not swatches |
| Sheepskin | 18 to 22 mm wool pile with leather face | Very warm, bulky, distinctive collar and cuff roll | B-3 and winter aviator bombers | Weight raises freight cost; panel matching is labour intensive |
Two practical observations follow from that table. First, nylon and polyester twill sit close enough in appearance that buyers frequently substitute one for the other to hit a price target, but the substitution changes sheen, drape and print behaviour, so it must be approved on a physical sample rather than a photograph. Second, leather and sheepskin are not simply more expensive versions of the same garment; they change pattern allowances, lining attachment, seam finishing and inspection criteria, which is why they belong in a separate development track.
For a concrete reference point on how a satin-shell bomber is specified in production, the MA-1 flight jacket build shows the standard combination of nylon shell, ribbed knit trims and utility pocket that most buyers are trying to reproduce.
Nylon Flight Satin: The MA-1 Benchmark
Why the glossy shell defines the categoryNylon flight satin is the fabric most people picture when they hear bomber jacket. It was adopted for military flight jackets because a tightly woven nylon filament yarn gives high wind resistance at low weight, sheds light rain, and does not absorb much water when wet. The characteristic sheen comes from the satin weave, in which filament yarns float over several picks before interlacing, producing a smooth face that reflects light evenly across the panel.
The specification that matters in bulk is not simply nylon, but the combination of denier, weave density, back treatment and finish. A 210D nylon at roughly 6.5 to 7.5 oz/yd2 gives the lighter, more fluid hand associated with fashion bombers, while a 420D construction at 8 to 9 oz/yd2 produces the stiffer, more protective feel associated with original flight jackets. Back calendering, in which the fabric is passed through heated rollers, closes the weave and improves down and fill containment, which is essential if the style is lightly quilted.
- Composition: state nylon 6.6 or nylon 6 explicitly, because the two dye differently and are not interchangeable within one order
- Denier and filament count: 210D, 320D or 420D, with the filament count per yarn if the mill publishes it
- Weave: satin, with picks and ends per inch so that a substitute mill cannot deliver a different surface
- Weight: give both gsm and oz/yd2 to avoid conversion disputes at inspection
- Back treatment: calendered, coated or laminated, and to what add-on weight
- Finish: durable water repellent, anti-static, or both, with the test method named
- Color: Pantone reference plus a light source for sheen approval, such as D65
- Performance: tear strength, seam slippage and color fastness thresholds, referenced to a named standard
Sheen is the failure mode that catches brands most often. Two dye lots of the same nylon can read as noticeably different gloss under store lighting even when the color numbers match, because gloss depends on surface texture as much as on dye. The workable control is to request a head-to-toe panel set from the bulk lot and approve it on a light box before cutting, and to keep the approved panel as the reference for any reorder. The fabric and material testing standards used on incoming lots explain which reports should accompany each shipment.
Nylon also has a practical limitation that should be stated up front: it is not a waterproof fabric in the technical sense. A standard flight satin with a water repellent finish handles drizzle and snow, not sustained rain. If the product brief calls for waterproofing, the fabric needs a coating or a membrane, and that decision changes cost, breathability and the care label. Promising waterproof performance from an uncoated satin shell is the fastest route to returns.
Polyester Twill and Poly-Cotton Blends: Volume Workhorses
The practical choice for print-heavy and mid-price programsPolyester twill has become the default shell for streetwear and team bombers because it accepts decoration better than nylon and costs less at the same visual weight. A 2/1 or 3/1 twill in the 220 to 300 gsm range gives a matte surface with enough body to hold a boxy bomber silhouette, and the fine diagonal line of the weave reads as fabric rather than plastic under retail lighting.
For screen print, heat transfer and embroidery, the matte polyester face is more forgiving than satin. Plastisol and water-based inks anchor on the textured surface, embroidery distortion is lower because the fabric does not slide, and the absence of a high-gloss finish means a printed graphic does not compete with the shell for attention. That is why club, campus and merchandise programs usually specify twill rather than satin even when the reference photo is an MA-1.
Poly-cotton at a 65/35 ratio occupies the middle ground. The cotton content softens the hand and reduces the synthetic sheen to almost nothing, while the polyester share keeps shrinkage and wrinkle recovery under control. Typical weights run 240 to 320 gsm, which suits a three-season bomber for corporate, hospitality and promotional buyers who need a garment that photographs well but survives repeated industrial laundering.
- State the blend ratio as a tolerance, for example 65/35 plus or minus 3 percent, so a mill cannot quietly shift the mix
- Specify the weave direction and a minimum picks and ends count to protect the surface appearance
- Require pre-shrinkage data from the mill, and a wash test on the bulk lot rather than the development sample
- Confirm the print method before the fabric is booked, because plastisol, water-based and sublimation each impose different surface requirements
- Ask for a pilling rating after 5,000 revolutions, since twill can fuzz at the collar and cuff rub points
When a design depends on all-over graphics, the fabric and the print method have to be chosen together. A tight twill takes a crisp screen print, while a looser weave lets ink wick and softens fine lines, and sublimation only works on polyester. The custom printed fabric options page sets out the combinations that hold up in bulk, and it is worth reading before finalising artwork dimensions.
Cotton Twill and Canvas: The Heritage A-2 Look
Dry hand, visible age, different quality controlsCotton twill and canvas belong to the heritage side of the category. An A-2 inspired bomber in an 8 to 12 oz/yd2 cotton twill reads as workwear rather than sportswear: the surface is matte, the drape is stiffer, and the garment develops visible character at the elbows, pocket mouths and cuffs. For brands selling into vintage, Americana or collegiate markets, that ageing behaviour is a feature rather than a defect, but it has to be controlled or the first wash will produce complaints.
The controlling specification for cotton is shrinkage. Unless the fabric is sanforized or pre-shrunk, a 100 percent cotton twill can move several percent in the first wash, which is enough to change a graded size run. Reputable mills publish residual shrinkage figures, and the factory should verify them with an in-house wash test on the actual bulk lot. Garment dyeing, common in this category for a deep, slightly uneven color, adds roughly seven to ten days to the calendar and must be planned into the delivery date rather than discovered at the end.
Weight selection drives the season. An 8 to 9 oz/yd2 twill gives a spring bomber that can be worn over a shirt, while 10 to 12 oz/yd2 canvas produces a jacket that behaves like outerwear and needs a heavier lining to avoid feeling raw against the skin. Corduroy sits alongside cotton twill as a texture option, usually at 8 to 14 wales per inch, and requires all panels to be cut in the same pile direction so that the color does not flip between the body and the sleeves.
- Specify the finished weight after washing, not only the greige weight, because the two differ measurably
- Require sanforized or pre-shrunk fabric with a stated residual shrinkage ceiling
- Confirm the dye route, since piece dye and garment dye produce different color depth and different lead times
- Approve a wash panel before bulk to see how the shade and hand change after one home laundry cycle
- Decide the lining early, because a heavier shell needs a smoother lining to keep the jacket wearable
A dry cotton shell also changes the trim specification. Ribbed knit collar, cuffs and hem in a cotton-rich yarn match the hand of the shell, while a shiny synthetic rib reads as a mismatch. Buyers often notice this inconsistency without being able to name it, which is why the trim should be approved against the shell rather than on its own card. A corduroy example, the brown corduroy bomber build, shows how pile direction and trim matching are handled in one style.
Leather, Suede and Sheepskin: When Fabric Sets the Price
A separate development track with different economicsLeather and suede bombers occupy the top of the category, and the fabric decision dominates everything else. Goat leather at 0.8 to 1.0 mm gives the classic A-2 hand: dense, windproof, with a fine grain that takes a deep aniline dye. Cowhide at a similar thickness is heavier and cheaper per square foot but reads as a fashion bomber rather than a flight jacket. Suede at 0.7 to 0.9 mm offers a softer, napped surface that photographs beautifully and marks easily, which raises the handling standard on the production floor.
Cost behaviour in leather is unlike woven fabric because hides are sold by area and yield, not by the meter. A hide with scars, tick marks or uneven thickness produces fewer usable panels, so two suppliers quoting the same leather grade can land at different garment costs once cutting loss is counted. That is why leather quotes should state the hide grade, the average yield per garment and the acceptable defect tolerance in writing, rather than a single price per piece.
Sheepskin, used for B-3 and aviator styles, is a different construction again: a leather face with 18 to 22 mm of wool pile attached. Panels are bulky, matching the pile height across body, sleeves and collar takes skill, and the finished jacket weighs enough to affect freight cost. Sampling in sheepskin should be done with production hides rather than small swatches, because pile variation only becomes visible across a full panel.
- Approve a production hide, not a swatch, before bulk cutting begins
- Agree the defect tolerance and the maximum number of splices per panel in writing
- Confirm the lining attachment method, since leather seams cannot be re-sewn without visible holes
- Expect a longer sampling cycle than woven styles and plan the calendar accordingly
- Check whether the tannery supplies an OEKO-TEX or equivalent leather safety report for the lot
Because these styles carry higher material value, the pre-production approval step matters more than usual. A leather or suede bomber should be signed off on the actual production material, with the approved garment retained as the bulk benchmark. Buyers who need to compare material routes across leather, suede and coated woven shells can review the custom fabric sourcing options in the same way they would for a woven program.
Finishes, Coatings and Weight Selection
The part of the specification buyers most often skipTwo bombers can use identical shell fabric and still perform differently because of finishing. A durable water repellent treatment determines how the surface beads light rain and how quickly it dries. Calendering changes the surface gloss and closes the weave. A polyurethane coating adds water resistance at the cost of breathability, and a membrane adds both water resistance and breathability at a significantly higher price. Each of these is a separate line in the quotation, so the finish block should be explicit rather than assumed.
| Shell weight | Metric equivalent | Selling season | Typical pairing |
|---|---|---|---|
| 6.5 to 7.5 oz/yd2 | 220 to 255 gsm | Spring and early autumn | Polyester taffeta lining, no fill or 40 to 60 gsm wadding |
| 7.5 to 9 oz/yd2 | 255 to 305 gsm | Autumn and mild winter | Taffeta lining, 60 to 100 gsm wadding |
| 9 to 12 oz/yd2 | 305 to 405 gsm | Winter | Quilted lining, 100 to 150 gsm wadding or light down |
| 18 to 22 mm sheepskin | Not comparable | Deep winter | No added fill, wool pile provides insulation |
The finish decisions should be tied to a named test method so that the bulk lot can be checked against the sample. Spray rating for water repellency, tear strength for the shell, seam slippage at the armhole, and color fastness to rubbing at the collar are the four that most often decide whether a shipment passes. If the style is quilted or lightly filled, downproofness also has to be verified, because a shell that leaks fill in the first week will generate returns regardless of how good the fabric looks.
Care labelling follows from the same block. A coated nylon shell, an uncoated cotton twill and a sheepskin jacket need different wash and dry instructions, and the label must match what the fabric can actually survive. Writing the care claim before the finish is fixed is a common cause of late-stage changes that ripple into packaging, hangtags and marketplace listings. Where a style sits between two categories, the comparison of bomber and varsity construction is a useful check on whether the fabric and trim plan belongs to the right product type.
How to Specify Bomber Fabric in a Tech Pack
Ten fields that prevent a sample-to-bulk driftA fabric specification that only says nylon or cotton is not a specification, it is a category. The fields below are the minimum a factory needs in order to source the same fabric twice, and the same list is what an inspector should check against the bulk lot. Writing them once at development stage costs an hour; discovering a mismatch after cutting costs a production run.
- Composition with tolerance, for example 100 percent nylon 6.6, or 65/35 polyester cotton plus or minus 3 percent
- Yarn or denier detail, including filament count for filament fabrics and yarn count for spun fabrics
- Weave or knit structure, with picks and ends per inch or wales per inch where relevant
- Finished weight in gsm and oz/yd2, measured after finishing rather than at greige stage
- Width, and whether it is cuttable width or full roll width
- Finish and coating specification, including add-on weight and the test method for each claim
- Color reference, with Pantone number, light source and the acceptable shade tolerance
- Physical performance thresholds for tear strength, seam slippage and color fastness
- Shrinkage allowance, with the wash procedure used to measure it
- Care and labelling requirements that follow from the finish
Send the specification as a document, not as a paragraph in an email, and ask the factory to return a fabric approval sheet naming the mill, the article number and the lot before cutting. That single document is what makes a reorder possible twelve months later, and it is also the reference an independent inspector will use when the bulk arrives.
Cost, MOQ and Timing by Fabric Route
What changes in the commercial termsFabric choice moves the commercial terms as much as the aesthetics. Woven synthetic shells are available from stock in common colors, so a 50 piece order per style can be booked quickly and sampling runs seven to fourteen days. Leather and sheepskin usually require hide booking, which adds lead time before cutting begins, and garment-dyed cotton adds a dye batch to the calendar. Bulk production for jacket programs typically runs 25 to 40 days after approval, and the fabric route determines whether that window is realistic.
Sample fees in this category usually fall between $50 and $200 per style depending on material, and they are normally deductible from the first bulk order. For leather and sheepskin, the sample fee is higher because production hides are consumed rather than swatches. It is worth confirming in writing which materials are considered consumable and how the deduction is applied, because the answer differs between suppliers and affects the true cost of development.
Payment terms across the category follow the same pattern: a 30 percent deposit to reserve capacity and buy materials, with the 70 percent balance due before shipment against the packing list. Where the fabric is imported or specially dyed, the deposit timing matters more, since the mill slot is usually booked against it. A factory that can show a written production schedule with fabric booking, cut date, sew-out and inspection milestones is easier to hold to a delivery date than one that communicates only at the end.
Final Answer
A bomber jacket is usually made from nylon flight satin at 210D to 420D for MA-1 styles, polyester or poly-cotton twill at 220 to 320 gsm for streetwear and uniform programs, cotton twill or canvas at 8 to 12 oz/yd2 for heritage looks, and leather, suede or sheepskin for premium flight jackets. Specify composition, denier or yarn count, weave, finished weight, finish and coating, color reference, performance thresholds and shrinkage allowance in the tech pack, then approve a bulk panel rather than a swatch. Nylon and polyester give the widest color and decoration options at the lowest cost, cotton brings a dry heritage hand with shrinkage to control, and leather or sheepskin raises both perceived value and development time.
The reliable way to choose is to work backwards from the reference photo and the retail price. Identify which of the four families the reference actually represents, confirm the weight that matches the selling season, and only then discuss decoration and trims. That sequence keeps the sample honest, keeps the quotation comparable, and keeps the bulk lot within the tolerance the label promises.